NEC AS193i-BK Users Manual - Page 9
Remove the Base Stand, Connect a Flexible Arm, Specifications
View all NEC AS193i-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Non-abrasive surface Figure R.1 Figure R.2 Remove the Base Stand NOTE: Always remove the Base Stand when shipping the LCD. 1. Place monitor face down on a non-abrasive surface (Figure R.1). 2. Using your thumb, press the button to unlock. 3. With the button pressed in, pull off the Base Stand. Figure R.3 Locking tabs Connect a Flexible Arm This LCD monitor is designed for use with a flexible arm. Please use screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be mounted to an arm which, guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark). NOTE: To meet the safety requirements, the monitor must be mounted to an arm that supports the weight of the monitor and be UL-certified. See page 11 for details. Remove the base stand before mounting. 12 mm M4 4 x 12 mm with lock washer and flat washer Thickness of Bracket (Arm) 2.0 ~ 3.2 mm Tighten all screws Specifications 4-SCREWS (M4) (MAX depth: 10 mm) If use other screw, check depth of hole. 100 mm 100 mm Weight of LCD assembly: AS172: 2.9 kg (MAX) AS193i: 3.4 kg (MAX) English-7