NEC LCD4620-2-IT LCD4020/4620/5220/6520, M40/M46 external control commands - Page 33

Appendix A. Operation Code (OP code) Table Item Brightness OP code page 00h Contrast 00h Sharpness 00h Black Level 00h Tint 00h Color 02h Color Temperature 00h Color control 00h PICTURE Gamma Selection 02h Adaptive Contrast 02h Movie Noise 02h Settings Reduction Film Mode 02h Menu tree reset 02h (Picture) Auto Setup 00h Auto Adjust H Position 00h V Position 00h ADJUST OP code Parameter 10h 12h 8Ch 92h 90h 1Fh 54h Red: 9Bh Yellow: 9Ch Green: 9Dh Cyan: 9Eh Blue: 9Fh Magenta: A0h Saturation: 8Ah 68h 8Dh 20h 23h CBh 1Eh 20h 30h 0: dark | MAX.: bright 0: low | MAX.: high 0: dull | 106: sharp 0: dark | 127: bright 0: | 63: 0: pale | 127: deep 0:2600K | 74:10000K 0: | 32:(center) | 64: 0: pale | 10: deep Gamma Table Selection 1: Native Gamma 4: Gamma=2.2 8: Gamma=2.4 7: S Gamma 5: DICOM SIM. 6: Programmable 0: None 1: Off 2: Low 3: Middle 4: High 0: Off | MAX. 1: Off 2: Auto 0: None 2: Reset Picture category 1: Execute N/A 0: Left side | Max.: Right side 0: Bottom side | Max.: Top side Remarks 100K/step Momentary Momentary Depends on a display timing Depends on a display timing (33/40)