NEC NP-M332XS MP300CM Installation Manual - Page 7

Installation to Threaded Rod (Not evaluated by UL - Professional installation only) 4 Thread two 1/4-20 hex thin nylon-insert locknuts (not included) on two 1/4-20 threaded rods (not included) to the desired height of projector mount assembly. Attach projector mount assembly (A) to the two 1/4-20 threaded rods using two 1/4-20 hex thin nylon-insert locknuts as shown in figure 4.1 or figure 4.2. 1/4-20 THREADED ROD (NOT INCLUDED) 1/4-20 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED) 1/4-20 THREADED ROD (NOT INCLUDED) 1/4-20 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED) A ARROW INDICATES FRONT OF MOUNT A ARROW INDICATES FRONT OF MOUNT fig. 4.1 1/4-20 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED) 1/4-20 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED) fig. 4.2 Visit the Peerless Web Site at www.peerlessmounts.com 7 of 10 ISSUED: 10-01-10 SHEET #: 056-9034-4 07-29-11 For customer care call 1-800-865-2112