NEC P221W-BK MultiSync P221W-BK : user's manual - Page 13

English ECO MODE Decreases the amount of power consumed by reducing the brightness level. OFF: Set brightness variable range from 0% to 100%. 1: Set brightness variable range from 0% to 75%. 2: Set brightness variable range from 0% to 50%. CUSTOM: Decreases the brightness level as determined by the user. Refer to the Advanced OSD menu for custom setting instructions. AUTO BRIGHTNESS OFF: No function. ON: Adjusts the brightness automatically, by detecting the brightness level of your environment and adjusting the monitor with the best BRIGHTNESS setting*1. NOTE: Do not cover environmental brightness sensor (Ambibright sensor). *1: Please refer to Page 20 for full "Auto Brightness" information. BLACK LEVEL Adjust the black level. Auto Adjust (Analog input only) Automatically adjusts the Image Position and H. Size settings and Fine settings. Image Controls LEFT / RIGHT (Analog input only) Controls Horizontal Image Position within the display area of the LCD. DOWN / UP (Analog input only) Controls Vertical Image Position within the display area of the LCD. H.SIZE (V.SIZE) (Analog input only) Adjusts the horizontal size by increasing or decreasing this setting. If the "AUTO Adjust function" do not give you a satisfactory picture setting, a further tuning can be performed using the "H.Size (or V.Size)" function (dot clock). For this a Moiré test pattern could be used. This function may alter the width of the picture. Use Left/Right Menu to center the image on the screen. If the H.Size (or V.Size) is wrongly calibrated, the result would look like on the left drawing. The image should be homogeneous. When H.SIZE value is wrong. When H.SIZE value is improved. When H.SIZE value is correct. FINE (Analog input only) Improves focus, clarity and image stability by increasing or decreasing this setting. If the "Auto Adjust function" and the "H.Size" function do not give you a satisfactory picture setting, a fine tuning can be performed using the "Fine" function. For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look like on the left drawing. The image should be homogeneous. When FINE value is wrong. When FINE value is correct. INPUT RESOLUTION (Analog Input Only) Selects resolution's priority of input signal to one of the following pair: 1360 x 768, 1680 x 1050 or 1280 x 768, 1680 x 1050 or 1024 x 768, 1400 x 1050. 1360 x 768, 1680 x 1050: Determines the resolution to 1360 x 768, 1680 x 1050. 1280 x 768, 1680 x 1050: Determines the resolution to 1280 x 768, 1680 x 1050. 1024 x 768, 1400 x 1050: Determines the resolution to 1024 x 768, 1400 x 1050. English-11