NEC P221W-BK MultiSync P221W-BK : user's manual - Page 19

English Appendix If you need detailed information about the controls, please use the advanced menu. • Turn off your monitor. • Turn on your monitor by pushing the "POWER" and "SELECT" button at the same time for at least one second simultaneously. Then press the control buttons (EXIT, LEFT, RIGHT, UP, DOWN). • You will see the Advanced menu. This menu is larger than the normal OSD. • Turn off and restart your monitor in the normal way. To make an adjustment, ensure that the tag is highlighted, then press "SELECT". To move to another tag, press "EXIT", then press "Left" or "Right" to highlight another tag. Tag1 Brightness Adjusts the overall image and screen background brightness. Press "Left" or "Right" to adjust. Contrast Adjusts the image brightness and contrast in relation to the background. Press "Left" or "Right" to adjust. Auto Contrast (Analog input only) Adjusts the image displayed for non-standard video inputs. Press "SELECT" to adjust. Any adjustment requires the image to have white portions. Auto Black Level (Analog input only) Automatically adjusts the black level. Any adjustment requires the image to have black portions. Press "SELECT" to activate Auto Adjust. ECO Mode Decreases the amount of power consumed by reducing the brightness level. OFF: Set brightness variable range from 0% to 100%. 1: Set brightness variable range from 0% to 75%. 2: Set brightness variable range from 0% to 50%. CUSTOM: Decreases the brightness level as determined by the user. ECO Mode Custom Allows the user to set a preferred brightness level when ECO Mode is in use. Auto Brightness OFF: No function. ON: Adjusts the brightness automatically, by detecting the brightness level of your environment and adjusting the monitor with your BRIGHTNESS setting. NOTE: Do not cover environmental brightness sensor (Ambibright sensor). Black Level Allows you to manually adjust the black level. Press "Left" or "Right" to adjust. LOW BRIGHTNESS ON: Reduces the brightness level. OFF: Default setting. Tag2 Auto Adjust (Analog input only) Automatically adjusts the Image Position and H.Size settings and Fine settings. Press "SELECT" to activate Auto Adjustment. Tag3 LEFT/RIGHT (Analog input only) Controls Horizontal Image Position within the display area of the LCD. Press "Left" or "Right" to adjust. DOWN/UP (Analog input only) Controls Vertical Image Position within the display area of the LCD. Press "Left" or "Right" to adjust. H. Size (Analog input only) Adjusts the horizontal size of the screen. If the "AUTO Adjust function" do not give you a satisfactory picture setting, a further tuning can be performed using the "H.Size (V.Size)" function (dot clock). For this a Moiré test pattern could be used. This function may alter the width of the picture. Use left/Right Menu to center the image on the screen. If the H.Size (V.Size) is wrongly calibrated, the result would look like on the left drawing. The image should be homogeneous. Fine (Analog input only) Improve focus, clarity and image stability by increasing or decreasing this setting. If the "Auto Adjust function" and the "H.Size" function do not give you a satisfactory picture setting, a fine tuning can be performed using the "Fine" function. For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look like on the left drawing. The image should be homogeneous. Sync Threshold (Analog input only) Adjusts the slice level of a synchronization signal. Adjusts the sensitivity of the separate or composite input signals. Try this option if the FINE adjustment does not successfully eliminate the noise. English-17