Netgear CSM4532 Software Administration Manual - Page 58
Configuration Static Port-channels
View all Netgear CSM4532 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
2. Add the ports to Port-channel 1 with LACP. (Switch) (Interface 0/1-0/3,0/6-0/7)#channel-group 1 mode active (Switch) (Interface 0/1-0/3,0/6-0/7)#exit 3. View information about Port-channel 1. (Switch) #show interface port-channel 1 Port Channel ID 1 Channel Name ch1 Link State Down Admin Mode Enabled Link Trap Mode Enabled STP Mode Enabled Type Dynamic Port-channel Min-links 1 Load Balance Option 3 (Src/Dest MAC, VLAN, EType, incoming port) LACP Min. Links 1 Mbr Device/ Port Port Ports Timeout Speed Active 0/1 actor/long 10G Full False partner/long 0/2 actor/long 10G Full False partner/long 0/3 actor/long 10G Full False partner/long 0/6 actor/long 10G Full False partner/long 0/7 actor/long 10G Full False partner/long 3.4.5.3. Configuration Static Port-channels The commands in this example show how to configure a static Port-channel on a switch. The Port-channel number is 3 (ch3), and the member ports are 10, 11, 14, and 17. To configure the switch: 1. Enter interface configuration mode for the ports that are to be configured as Port-channel members. (Switch) (Config)#interface range 0/10-0/12,0/14,0/17 NETGEAR M4500 Series Switches Software Administration Manual 58