Netgear CSM4532 Software Administration Manual - Page 76
VLAN-based Mirroring, Flow-based Mirroring
View all Netgear CSM4532 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
3.8.2.3. Configuration on the Destination Switch (SW3) 3.8.3. VLAN-based Mirroring In this example, traffic from all ports that are members of VLAN 10 is mirrored to port 0/18. To configure VLAN based mirroring: 1. Access VLAN Config mode and create VLAN 10. (Switch) (Config)#vlan database (Switch) (Vlan)#vlan 10 (Switch) (Vlan)#exit 2. Configure the destination interface port as port 0/18. (Switch) #configure (Switch) (Config)#port-monitor session 1 destination interface 0/18 3. Configure VLAN 10 as the source interface for the port mirroring session. (Switch) (Config)#port-monitor session 1 source vlan 10 4. Enable the port mirroring session on the switch. (Switch) (Config)#port-monitor session 1 mode (Switch) (Config)#exit 3.8.4. Flow-based Mirroring In this example, traffic from port 1 is mirrored to port 18 if it matches the criteria defined in the IP ACL or MAC ACL that are associated with the port mirroring session. To configure flow based mirroring: 1. Create the extended IP access list IPACL. (Switch) #configure (Switch) (Config)#ip access-list IPACL (Switch) (Config-ipv4-acl)#permit ip 1.1.1.1 0.0.0.0 any (Switch) (Config-ipv4-acl)#exit 2. Create the mac access list MACL. (Switch) #configure (Switch) (Config)#mac access-list extended MACL (Switch) (Config-mac-access-list)#permit 00:00:00:00:00:11 00:00:00:00:00:00 any (Switch) (Config-mac-access-list)#exit 3. Configure the destination port as port 0/18. NETGEAR M4500 Series Switches Software Administration Manual 76