Netgear DGND3700v1 [English]: DGND3700 User Manual (PDF) - Page 104
VPN Status, Use Auto Policy to Con VPN Tunnels, Activate a VPN Tunnel
View all Netgear DGND3700v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 Note: See Use Auto Policy to Configure VPN Tunnels on page 112 for information about how to enable the IKE keep-alive capability on an existing VPN tunnel. 6. Repeat these steps for the gateway on LAN B, and pay special attention to the following network settings: • WAN IP of the remote VPN gateway (for example, 14.15.16.17) • LAN IP settings of the remote VPN gateway: - IP address (for example, 192.168.0.1) - Subnet mask (for example, 255.255.255.0) - Pre-shared key (for example, 12345678) 7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps: Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See Activate a VPN Tunnel on page 105 for information about the other ways. a. On the wireless modem router menu, select VPN Status. The VPN Status/Log screen displays: Virtual Private Networking 104