Netgear DM602 DM602 Reference Manual - Page 37
Configuring the Modem in Router Device Mode for an ISP Account with PPPoE or PPPoA Login, Next
UPC - 606449024487
View all Netgear DM602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Reference Manual for the Model DM602 ADSL Modem Configuring the Modem in Router Device Mode for an ISP Account with PPPoE or PPPoA Login If your Internet service account uses a login protocol such as PPP over Ethernet (PPPoE) or PPP over ATM (PPPoA), fill out the menu below. Figure 4-3. Menu for PPP login accounts 1. Enter the PPPoE or PPPoA login user name and password provided by your ISP. These fields are case sensitive. If you wish to change the login time-out, enter a new value in minutes. You will no longer need to launch the ISP's login program on your computer in order to access the Internet. When you start an Internet application, your modem will automatically log you in. 2. Next, enter the Idle Time-out value in minutes. Note: PPPoE and PPPoA will authenticate with the network when you have data to transmit.The modem will stay connected until you stop transmitting and will then wait for the login time-out to expire before disconnecting. Basic Configuration of the Modem 4-3