Netgear FSM726v3 FSM726v3 Hardware Installation Guide
Netgear FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch Manual
 |
View all Netgear FSM726v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear FSM726v3 manual content summary:
- Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 1
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134 USA 202-10452-03 July 2009 - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 2
Support information card. E-mail: [email protected] North American NETGEAR website: http://www.netgear.com Trademarks NETGEAR, the NETGEAR logo, ProSafe, and Auto Uplink are trademarks or registered trademarks of NETGEAR NETGEAR ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726 instructions. - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 3
with the instructions, may cause that the NETGEAR ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726 is shielded user may be required to take appropriate measures. Customer Support Refer to the Support Information Card that shipped with your ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726 - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 4
page that you can access at the universal resource locator (URL) http://www.netgear.com. A direct connection to the Internet and a Web browser such as : Publication Part Number: Publication Version Number FSM726 July 2009 switch chassis Managed Layer 2 Switch Business English 202-10452-03 1.0 iv v1 - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 5
About This Manual The NETGEAR® ProSafe® Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide describes how to install, configure and troubleshoot the ProSafe 24Port Ethernet L2 Managed Switch Model FSM726. The information in this manual is intended for readers - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 6
Hardware Installation Guide • Scope. This manual is written for the Managed Layer 2 Switch according to these specifications: Product Version Manual Publication Date ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726 July 2009 Note: Product updates are available on the NETGEAR, Inc. website - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 7
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide Revision History Part Number Version Number Date Description 202-10452-01 1.0 202-10452-02 1.0 202-10452-03 1.0 October 2008 November 2008 July 2009 Original publication. - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 8
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide viii v1.0, July 2009 - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 9
This Manual vi Revision History ...vii Chapter 1 Introduction Front Panel and LEDs ...1-1 Rear Panel ...1-3 Safety Instructions ...1-3 Switch 2-6 RJ-45 Ports ...2-6 Connecting a Console to the Switch 2-7 Chapter 3 Troubleshooting Troubleshooting Chart 3-1 Additional Troubleshooting Suggestions - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 10
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide Appendix A Factory Default Settings and Technical Specifications Factory Default Settings A-1 Technical Specifications A-2 x v1.0, July 2009 - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 11
increase productivity. This guide describes the ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726. The switch can be free-standing, or rack-mounted in a wiring closet or an equipment room. For information about features for each product, see the NETGEAR website at http://www.netgear.com. Front - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 12
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide The following table describes the LEDs on the front panel of the switch. Table 1. LED Descriptions for FSM726 LED PWR (Power) FAN 10/100 (port 1 to 24) (1 LED per port) SFP ports (100/1000 Mbps) 10/100/1000M - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 13
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide Rear Panel The rear panel has a console port and a standard AC power receptacle for the supplied power cord. Console port Power receptacle Figure 2 Safety Instructions contact your trained service provider: - - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 14
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide service provider or local power company. • To help avoid damaging your system, be sure that the voltage selection switch help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 15
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide • Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications. • Always follow your local and national wiring rules. • - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 16
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide 1-6 Introduction v1.0, July 2009 - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 17
the Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, the Administration Manual for the 7200 Series Layer-2 Switches, and this Hardware Installation Guide • Warranty and Support Card If you ordered SFP modules with your switch, they are provided in a separate package. If - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 18
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide Protecting Against Electrostatic Discharge Note: If any item is found missing or damaged, contact your local NETGEAR reseller for replacement. 5. Inspect the products and accessories for damage. Report any - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 19
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide Installation Install the equipment in the following sequence, as presented in this chapter: 1. Select a Location. See "Selecting a Location. 2. Install the Switch. See "Installing the Switch" on page 2-4. 3. - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 20
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide Table 2-1. Site Requirements for Switch Location (continued) Requirements Cabling Route the cable to avoid sources of electrical noise such as radio transmitters, broadcast amplifiers, power lines, and - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 21
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide 3. Tighten the screws with a No. 1 the AC power adapter cable to the rear of the switch, and the other end to a grounded three-pronged AC outlet. 2. Check the Power LED on the front panel of the switch. The LED - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 22
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide SFP Modules The module bay accommodates a standard SFP module with an LC connector that is compatible with the IEEE 802.3z 1000BASE-X standard. SFP modules - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 23
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide Connecting a Console to the Switch After you install the switch and apply power, you can connect to it with a terminal or workstation. You can use the Command Line Interface (CLI) to identify the IP address. To - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 24
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide After you connect a console to the switch, you will need to configure the switch. The following documents are provided for this purpose: • Command Line Interface Reference for the ProSafe 7200 Series Layer-2 - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 25
, causes, and solutions of possible problems. Table 3-1. Troubleshooting Problem Cause Solution Power LED is off. No power is received Link LED is off or intermittent. Port connection is not working. Check the power cord connections for the switch at the switch and at the connected device - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 26
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide Additional Troubleshooting Suggestions If the suggestions in Table 3-1 do not resolve your problem, refer to the troubleshooting suggestions in this section. • Network Adapter Cards Make sure that the network - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 27
the ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726. Table A-1. Default Configuration Settings Features Port speed Port duplex Flow control (half duplex) Flow control (full duplex) Broadcast storm control Gigabit port type Management IP configuration Password protection User name Password - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 28
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide Table A-1. Default Configuration Settings (continued) Features Port mirroring Traffic prioritization ACL GVRP GMRP MAC address aging SNMP community VLAN Ingress filtering Default Setting Disabled Disabled - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 29
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide Table A-2. Technical Specifications (continued) Feature (continued) Power consumption Dimensions (W x D x H) Weight Management Environment Electromagnetic emissions and immunity Safety Description 15 W maximum - Netgear FSM726v3 | FSM726v3 Hardware Installation Guide - Page 30
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide A-4 Factory Default Settings and Technical Specifications v1.0, July 2009
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
 |
 |
202-10452-03
July 2009
NETGEAR
, Inc.
350 E. Plumeria Drive
San Jose, CA 95134 USA
Managed Layer 2 Switch
with 2 Gigabit Ethernet
Ports FSM726 Hardware
Installation Guide