Netgear FSM726v3 FSM726v3 Hardware Installation Guide - Page 28
Technical Specifications, Table, A-1. Default Configuration Settings continued - fsm726 300
View all Netgear FSM726v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide Table A-1. Default Configuration Settings (continued) Features Port mirroring Traffic prioritization ACL GVRP GMRP MAC address aging SNMP community VLAN Ingress filtering Default Setting Disabled Disabled Disabled Disabled Disabled 300 seconds Public (read-only access), private (read/write access) Enabled Technical Specifications Table A-2. Technical Specifications Feature Description IEEE network protocol and standards compatibility • 802.3 10BASE-T • 802.3u 100BASE-TX • 802.3z 1000BASE-SX • 802.3ab 1000BASE-T • 802.3x flow control Interface (Auto Uplink on all RJ-45 ports) • 24 RJ-45 connectors for 10BASE-T and 100BASE-TX • 2 Gigabit Interface converter (SFP) slots for SFP modules • 2 RJ45 ports for 10BaseT, 100BaseT, and 1000BaseT • RS-232 console port Performance • Forwarding modes: store-and-forward • Bandwidth: 8.8Gbps • Network latency: Less than 15 microseconds for 64 byte frames in store and forward mode for 100 Mbps to 100 Mbps transimission Address database size Addressing 16K media access control (MAC) addresses per system 48-bit MAC address 10/100/1000 buffer memory Acoustic noise (ANSI-S10.12) 1-MB embedded memory 36.6 dB Heat dissipation 50 BTU/hr. Mean time between failure (MTBF) 562,110 hours (~ 64.2 years) A-2 Factory Default Settings and Technical Specifications v1.0, July 2009