Netgear FSM726v3 FSM726v3 Hardware Installation Guide - Page 22
SFP Modules, Connecting Equipment to the Switch, RJ-45 Ports
View all Netgear FSM726v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide SFP Modules The module bay accommodates a standard SFP module with an LC connector that is compatible with the IEEE 802.3z 1000BASE-X standard. SFP modules are sold separately. To install an SFP module insert the SFP module into the module bay. Press firmly to ensure that the module seats into the connector. Figure 2-2 Connecting Equipment to the Switch You can connect devices, an SPF Gigabit Ethernet module, and a console to the switch. RJ-45 Ports The switch uses Auto Uplink technology, which enables you to attach devices using either straight-through or crossover cables. Use a Category 5 (Cat5) unshielded twisted-pair (UTP) cable terminated with an RJ-45 connector. Note: Ethernet specifications limit the cable length between the switch and the attached device to 328 feet (100 meters). 2-6 Hardware Installation v1.0, July 2009