Netgear GS108 GS108T Setup Manual - Page 57
Specifies that the egress outgoing packet is tagged for all ports.
UPC - 606449025163
View all Netgear GS108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
GS108T Smart Switch Software Administration Manual Figure 4-9 2. From the VLAN Identifier drop-down list, select the number that represents the VLAN you want to view or modify. You can either assign the same tag setting to or remove it from all ports in the VLAN in step 3, or assign a tag setting to or remove it from each individual port in the VLAN in step 4. These steps are mutually exclusive. 3. To assign the same tag setting to or remove it from all ports in the VLAN, toggle the check box to the left of Unit 1. The tag setting determines if packets that are transmitted from each port are tagged with the VLAN ID and other information. The possible tag settings are: - T. Specifies that the egress (outgoing) packet is tagged for all ports. - U. Specifies that the egress packet is untagged for all ports. - Empty. Specifies that none of the ports are part of the VLAN. 4. To assign a tag setting to or remove it from an individual port in the VLAN: a. Click Unit 1. A screen similar to the following displays. Figure 4-10 Configuring Switching v1.0, December 2007 4-13