Netgear GS724TS GS7xxTS User Manual - Page 155
Bandwidth, Shaping Rates.
UPC - 606449049442
View all Netgear GS724TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
GS700TS Smart Switch Software Administration Manual 2. Select either Strict Priority or WRR to specify the traffic scheduling method. 3. Click APPLY to update the device. Bandwidth After packets are assigned to a queue, a scheduling scheme can be assigned to an interface, using either: • Committed Burst Size - Indicates the maximum number of data bits transmitted within a specific time interval. • Committed Information Rate - Indicates the rate that data is transmitted. The rate is averaged over a minimum time increment. The Bandwidth screen allows the network manager to define Ingress Rate Limit and Egress Shaping Rates. To define bandwidth settings: 1. Click QoS > CoS > Basic > Bandwidth. The Bandwidth screen displays: Figure 5-4 The Bandwidth screen contains the following fields: • Interface - Displays the ports for which the bandwidth settings are displayed. • Ingress Rate Limit Status - Select whether rate limiting is defined on the interface. The possible field values are: - Enable - Enables ingress rate limiting on the interface. Configuring QoS 5-6 v1.0, June 2009