Netgear GS724TS GS7xxTS User Manual - Page 19
NIC Setting on the Host that Accesses the GS700TS Gigabit Stackable Smart Switch, Disable - password
UPC - 606449049442
View all Netgear GS724TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
GS700TS Smart Switch Software Administration Manual Figure 1-3 7. Select Disable to disable DHCP. 8. The default IP address is 192.168.0.239 and the default subnet mask is 255.255.255.0. If you want different values, enter the switch IP address, gateway IP address and subnet mask. 9. Type your password and click Set. Please ensure that your PC and the GS700TS Gigabit Stackable Smart Switch are in the same subnet. Note the settings for later use. NIC Setting on the Host that Accesses the GS700TS Gigabit Stackable Smart Switch The settings of your Network Interface Card (NIC) under MS Windows OS are made with entries into Windows screens similar to the ones shown below. For comparison, the settings screens of the switch are also shown although they do not appear in the Windows view. Getting Started with Switch Management 1-6 v1.0, June 2009