Netgear GS748AT GS724AT/GS748AT Software Administration Manual - Page 115
Switching > Multicast > Basic > IGMP Snooping Configuration, IGMP Snooping Status
UPC - 606449059793
View all Netgear GS748AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
GS700AT Smart Switch Software Administration Manual packets and Multicast traffic. A port requesting to join a specific Multicast group issues an IGMP report specifying that Multicast group. This results in the creation of the Multicast filtering database. To configure Basic IGMP Snooping: 1. Click Switching > Multicast > Basic > IGMP Snooping Configuration. The Basic IGMP Snooping Configuration screen displays: Figure 4-25 The Basic IGMP Snooping Configuration screen contains the following fields: IGMP Snooping Configuration • IGMP Snooping Status - Select the IGMP Snooping status on the device. The possible field values are: - Enable - Enable IGMP Snooping on the device. - Disable - Disable IGMP Snooping on the device. Interface Settings • VLAN ID - Displays the VLAN ID. • Status - Select the IGMP Snooping status on the VLAN. The possible field values are: - Enable - Enable IGMP Snooping on the VLAN. - Disable - Disable IGMP Snooping on the VLAN. 2. Select the IGMP Snooping Status in the provided field. 3. Click APPLY to update the device. Configuring Switching Settings v1.0, October 2008 4-38