Netgear GS748AT GS724AT/GS748AT Software Administration Manual - Page 87
Duplex Mode, Auto Negotiation, Flow Control, APPLY
UPC - 606449059793
View all Netgear GS748AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
GS700AT Smart Switch Software Administration Manual - 10M - The LAG is currently operating at 10 Mbps. - 100M - The LAG is currently operating at 100 Mbps. - 1000M - The LAG is currently operating at 1000 Mbps. • Duplex Mode - Displays the duplex mode of the LAG. The possible field value is: - Full - The interface supports transmission between the device and its link partner in both directions simultaneously. • Auto Negotiation - Select the auto negotiation status of the LAG. Auto Negotiation is a protocol between two link partners that enables a port to advertise its transmission rate, duplex mode, and flow control abilities to its partner. Auto Negotiation is enabled by default. The possible field values are: - Enable - Enable auto negotiation. - Disable - Disable auto negotiation. • Flow Control - Select the flow control status of the LAG. Operates when the port is in full duplex mode. Flow Control is disabled by default. The possible field values are: - Enable - Enable flow control. - Disable - Disable flow control. 2. Select the interface. 3. Enter or modify the fields in the first row. 4. Click APPLY to update the device. Configuring Switching Settings v1.0, October 2008 4-10