Netgear GS748AT GS724AT/GS748AT Software Administration Manual - Page 151
Security > Traffic Control > Storm Control, Interface, Broadcast Control, Broadcast Mode
UPC - 606449059793
View all Netgear GS748AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
GS700AT Smart Switch Software Administration Manual Storm control can be enabled per port by defining the packet type and the rate the packets are transmitted. The system measures the incoming Broadcast and Multicast frame rates separately on each port, and discards the frames when the rate exceeds a user-defined rate. By default, Storm Control is enabled on all ports for Broadcast packets with a threshold of 200 kbps. The Storm Control screen provides fields for configuring broadcast storm control. To configure Storm Control: 1. Click Security > Traffic Control > Storm Control. The Storm Control screen displays: Figure 6-9 The Storm Control screen contains the following fields: • Interface - Displays the port number for which the storm control information is displayed. • Broadcast Control - Select whether storm control is enabled or disabled on the interface according to Broadcast mode. The possible field values are: - Enable - Enable storm control on the interface. - Disable - Disable storm control on the interface. • Broadcast Mode - Select the Broadcast control mode on the interface. The possible field values are: - Mulicast & Broadcast & Unknown Unicast - Count Broadcast, Multicast and Unicast traffic together. - Multicast & Broadcast - Count Broadcast and Multicast traffic together. - Broadcast Only - Count Broadcast traffic only. This mode is enabled by default. Managing Security v1.0, October 2008 6-15