Netgear MBR1210-1BMCNS MBR1210 Getting Started Guide - Page 6

The Internet Port indicator

Get Netgear MBR1210-1BMCNS - This Product is a Special Offering PDF manuals and user guides View all Netgear MBR1210-1BMCNS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Start-up • Allow approximately one minute for the Turbo Hub to boot/start-up. When the start-up procedure is finished, the following should occur: 1. The Power button will show amber for a moment and then turn to a steady green. A solid amber light indicates the unit has failed to power-on. 2. When a high-speed connection is established to the Bell HSPA+ network, the 2G/3G indicator will be lit up in solid blue. 3. The Wi-Fi indicator will show solid blue. 4. The Internet Port indicator will show green. 5. The Signal Quality indicator from the Bell HSP+ network. shows the quality of the signal a. Solid blue: Excellent coverage b. Solid green: Good coverage c. Solid amber: Minimal coverage d. Off: No coverage If any of these conditions does not occur, refer to the Troubleshooting section starting on page 7. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
5
Start-up
•
Allow approximately one minute for the Turbo Hub to boot/start-up.
When the start-up procedure is finished, the following should occur:
1.
The Power button
will show amber for a moment and then
turn to a steady green. A solid amber light indicates the unit has failed
to power-on.
2.
When a high-speed connection is established to the Bell HSPA+
network, the 2G/3G indicator
will be lit up in solid blue.
3. The Wi-Fi indicator
will show solid blue.
4. The Internet Port indicator
will show green.
5.
The Signal Quality indicator
shows the quality of the signal
from the Bell HSP+ network.
a. Solid blue: Excellent coverage
b. Solid green: Good coverage
c. Solid amber: Minimal coverage
d. Off: No coverage
If any of these conditions does not occur, refer to the Troubleshooting section
starting on page 7.