Netgear MBR1210-1BMCNS MBR1210 Getting Started Guide - Page 7
Using Your Turbo Hub
View all Netgear MBR1210-1BMCNS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
USING YOUR TURBO HUB Connecting your computer through an Ethernet cable • Attach the enclosed Ethernet cable to one of the Ethernet connectors (1 - 4) on the back of the Turbo Hub. • Connect the other end of the Ethernet connector to a PC/laptop. • Launch your Internet browser and you're online. You can connect up to four (4) computers using the Ethernet ports. One shielded Ethernet cable is included. Note: If connecting additional PCs, use only shielded Ethernet cables in order to fulfill electrical emissions requirements (CE, FCC). Connecting your device through Wi-Fi Wi-Fi security has been enabled on your Turbo Hub. To connect through Wi-Fi, enter the following on your Wi-Fi-enabled PC/laptop or device: • The Wi-Fi Network Name (SSID). You can find your Wi-Fi Network Name (SSID) printed on the back of your Turbo Hub. The Wi-Fi Network Name (SSID) will be BellXXXX, where XXXX is random numbers or letters. • The WPA Passphrase. You can find your WPA Passphrase printed on the back of the Turbo Hub, under the title "WPA/WPA2 - PSK Passphrase." • Launch your Internet browser and you're online. Note: You can connect up to 15 devices using Ethernet and/or Wi-Fi. 6