Netgear MR5200 User Manual - Page 47
Settings > Advanced Settings > Cellular, IPV4V6, PAP or CHAP, The Add APN screen displays.
View all Netgear MR5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Nighthawk M5 5G WiFi 6 Mobile Router 4. Select Settings > Advanced Settings > Cellular. The Add APN screen displays. 5. Click the Add button. The APN page displays. 6. Specify the APN name. The APN name is a label for display in the UI. 7. Specify the APN This step specifies the APN as defined by the carrier 8. Change the PDP (data protocol), if necessary: • IPV4 • IPV6 • IPV4V6 9. Change the PDP roaming protocol, if necessary: • None • IPV4 • IPV6 • IPV4V6 Note: PDP roaming protocol is the IP protocol used while you are roaming (for example when you are traveling and the roaming network does not support IPv6). 10. Select the network authentication mode: • None • PAP • CHAP • PAP or CHAP 11. Enter the name and password, if they are required for the network. 12. Click the ADD button. The entry is added to the table. Maintain Your Mobile Router 47 User Manual