Netgear PS121 PS121v1 User Manual - Page 12

User Manual for the NETGEAR PS121 Mini Print Server Diagnostic/Reset Push Button This button has 2 functions: • Restore the factory default settings • Print a test page containing all current settings Recessed Diagnostic/Reset Button Figure 2-5: Print Server recessed diagnostic/reset button The button is recessed. Use a pin or paper clip to press it. How to Restore the Factory Default Settings 1. Unplug the Print Server. 2. Press and hold the diagnostic button. While pressing the button, plug in the Print Server. 3. If you continue pressing the button for 10 seconds, a diagnostic page will be printed, showing the new (default) settings. How to Generate a Diagnostic Printout Note: PostScript printers are unable to print this page. If you have a PostScript printer, the test page will not be printed. 1. Ensure that both the Print Server and the attached printer are on. 2. Press the diagnostic button, and hold it in for 2 seconds. 3. The test page, containing the current settings, will print. 2-6 Introduction