Netgear PS121 PS121v1 User Manual - Page 15
First, Connect the Print Server and Printer to Your Network, should be off. - usb
UPC - 606449034684
View all Netgear PS121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
User Manual for the NETGEAR PS121 Mini Print Server First, Connect the Print Server and Printer to Your Network Connect the PS121 to your printer. a. Ensure that the PS121 power is OFF. b. Connect one end of the supplied USB cable (A) to the PS121, and the other end to the USB connector on your printer. PS121 USB Port c. Turn on your printer. &RQQHFWWKH3ULQW6HUYHUWRWKH3ULQWHU d. Connect the 9v power cord to the PS121, 86%&DEOH and plug the the power adapter. e. Turn on your printer. A 3ULQWHU f. Check the PS121 status lights and verify the following: • ACT light: When the print server is powered on, the ACT light will blink then turn solid green. • ERROR light: The ERROR light should be off. 3686%3RUW Connect thePS121 to your printer &RQQHFWLQJ Connect the Ethernet cable from the PS121 WKH3ULQW6HUYHUWRWKH 5RXWHU6ZLWFKRU+XE to a network device like a router. B (WKHUQHW&DEOH a. Insert one end of an Ethernet cable (B) into an open Ethernet port in the network C device like a hub, switch, or router. 5RXWHU6ZLWFKRU+XE 36 (WKHUQHW3RUW 3ULQWHU b. Insert the other end (C) into the Ethernet port on the PS121. Note: Ethernet specifications limit the cable distance to 328 ft. in length. Your PS121 and printer are now connected to your network! Setup 3-3