Netgear WAG302NA Reference Manual - Page 70
Accept Both DHCP Enabled and Static IP Con d Wireless Clients
UPC - 606449039467
View all Netgear WAG302NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Figure 5-1: Advanced IP Settings for Wireless Clients screen You may configure the Advanced IP Settings for Wireless Clients if you are a network system administrator. • Use AP as DHCP Server: You may turn on this option and the Access Point will function as a DHCP Server for Wireless Clients only. The Access Point will provide the pre-configured TCP/IP configurations for all wireless stations connected to this Access Point. There are two options available for managing the wireless clients: - Accept DHCP Enabled Wireless Clients Only: The Access Point can only provide the TCP/IP configurations to those wireless clients with the DHCP enabled. - Accept Both DHCP Enabled and Static IP Configured Wireless Clients: The Access Point will support wireless clients with the DHCP enabled and the static IP configured. You need to configure the following TCP/IP configurations for using Access Point as a DHCP Server for Wireless Clients. - Starting IP Address: Type the starting IP address can be assigned from the DHCP server on this Access Point. - Ending IP Address: Type the Ending IP address can be assigned from the DHCP server on this Access Point 5-2 Advanced Configuration 202-10078-01