Netgear WAG302NA Reference Manual - Page 80

All Point-to-Point APs must have AP2's MAC address in its Remote AP MAC address

Get Netgear WAG302NA - WAG302.PROSAFE 11ABG Dual Band Wireless Access Point PDF manuals and user guides
UPC - 606449039467
View all Netgear WAG302NA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 • All APs must be on the same LAN. That is, all the APs LAN IP address must be in the same network. • If using DHCP, all WAG302 Access Points should be set to "Obtain an IP address automatically (DHCP Client)" in the IP Address Source portion of the Basic IP Settings menu. • All WAG302 Access Points use the same SSID, Channel, authentication mode, if any, and encryption in use. • All Point-to-Point APs must have AP2's MAC address in its Remote AP MAC address field. 3. Verify connectivity across the LANs. • A computer on any LAN segment should be able to connect to the Internet or share files and printers with any other PCs or servers connected to any of the three LAN segments. • Wireless stations will not be able to connect to the WAG302 Access Points in the illustration above. If you require wireless stations to access any lan segment, you can additional WAG302 Access Points configured in Wireless Access Point mode to any LAN segment. Note: You can extend this multi-point bridging by adding additional WAG302s configured in Point-to-Point mode for each additional LAN segment. Furthermore, you can extend the range of the wireless network with NETGEAR wireless antenna accessories. 5-12 202-10078-01 Advanced Configuration

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
5-12
Advanced Configuration
202-10078-01
•
All APs must be on the same LAN. That is, all the APs LAN IP address must be in the
same network.
•
If using DHCP, all WAG302 Access Points should be set to “Obtain an IP address
automatically (DHCP Client)” in the IP Address Source portion of the Basic IP Settings
menu.
•
All WAG302 Access Points use the same SSID, Channel, authentication mode, if any, and
encryption in use.
•
All Point-to-Point APs must have AP2’s MAC address in its Remote AP MAC address
field.
3.
Verify connectivity across the LANs.
•
A computer on any LAN segment should be able to connect to the Internet or share files
and printers with any other PCs or servers connected to any of the three LAN segments.
•
Wireless stations will not be able to connect to the WAG302 Access Points in the
illustration above. If you require wireless stations to access any lan segment, you can
additional WAG302 Access Points configured in Wireless Access Point mode to any LAN
segment.
Note
: You can extend this multi-point bridging by adding additional WAG302s configured in
Point-to-Point mode for each additional LAN segment. Furthermore, you can extend the range of
the wireless network with NETGEAR wireless antenna accessories.