Netgear WAG302NA Reference Manual - Page 95

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 Table B-1: Encryption Key Sizes Encryption Key Size # of Hexadecimal Digits 64-bit (24+40) 10 128-bit (24+104) 26 Example of Hexadecimal Key Content 4C72F08AE1 4C72F08AE19D57A3FF6B260037 Note: Typically, 802.11 access points can store up to four 128-bit WEP Keys but some 802.11 client adapters can only store one. Therefore, make sure that your 802.11 access and client adapters' configurations match. WEP Configuration Options The WEP settings must match on all 802.11 devices that are within the same wireless network as identified by the SSID. In general, if your mobile clients will roam between access points, then all of the 802.11 access points and all of the 802.11 client adapters on the network must have the same WEP settings. Note: Whatever keys you enter for an AP, you must also enter the same keys for the client adapter in the same order. In other words, WEP key 1 on the AP must match WEP key 1 on the client adapter, WEP key 2 on the AP must match WEP key 2 on the client adapter, and so on. Note: The AP and the client adapters can have different default WEP Keys as long as the keys are in the same order. In other words, the AP can use WEP key 2 as its default key to transmit while a client adapter can use WEP key 3 as its default key to transmit. The two devices will communicate as long as the AP's WEP key 2 is the same as the client's WEP key 2 and the AP's WEP key 3 is the same as the client's WEP key 3. Wireless Channels The wireless frequencies used by 802.11a/g networks are discussed below. 802.11b/g Wireless Channels IEEE 802.11b/g wireless nodes communicate with each other using radio frequency signals in the ISM (Industrial, Scientific, and Medical) band between 2.4 GHz and 2.5 GHz. Neighboring Wireless Networking Basics B-7 202-10078-01