Netgear WAG511 WAG511 User Manual - Page 33
Setting up Advanced Security, Advanced Security includes WPA/WPA2, WPA/WPA2-PSK, 802.1x
UPC - 606449027013
View all Netgear WAG511 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511 User Manual 5. Select Create with Passphrase and enter the passphrase. The configuration utility will automatically generate the WEP keys. Note: The characters are case sensitive. Be sure to use the same passphrase for all the wireless devices in the network. If the passphrase method is not available in the other devices, you must manually enter the keys to match exactly what is in the access point and other 802.11b wireless devices. 6. To save your settings in a Profile, click Save Profile. 7. Click Apply, and then click Close to exit the utility. Setting up Advanced Security Advanced Security includes WPA/WPA2, WPA/WPA2-PSK, 802.1x, and Cisco LEAP. To configure Advanced security: 1. Make sure the NETGEAR software is installed and the WAG511 Wireless PC Card is fully inserted in the CardBus slot in your computer. 2. Use the icon to open the Smart Wireless Utility. The Settings tab page opens. 3. Enter the profile and Network Name (SSID). Note: You will not get a wireless network connection unless the SSID that you enter exactly matches the SSID used by the access point v4.0, March 2007 2-11