Netgear WG302 WG302v1 Reference Manual - Page 38
Understanding WEP/WPA Security Options, Network Authentication, Open System, Shared Key, Legacy 802.1x
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302 Understanding WEP/WPA Security Options The table below identifies the various WEP/WPA security options. A full explanation of these standards is available in Appendix B, "Wireless Networking Basics". Figure 3-9: Wireless Security Settings The WEP/WPA settings are explained as follows: • Network Authentication: Specifies the Authentication type used. The default is Open System. Select the desired option: - Open System: If selected, you have the option of using WEP encryption, or no encryption. - Shared Key: If selected, you must use WEP; at least one shared key must be entered. - Legacy 802.1x: If selected, you must configure the Radius Server Settings Screen. - WPA-PSK: If selected, you must use TKIP encryption, and enter the WPA passphrase (Network key). - WPA with Radius: If selected, you must configure the Radius Server Settings Screen. - WPA2-PSK: WPA2 is a later version of WPA. Only select this if all clients support WPA2. If selected, you must use AES encryption, and enter the WPA passphrase (Network key). 3-16 July 2005 v3.0 Basic Installation and Configuration