Netgear WNDAP350 Application Note: Deploy a ProSecure UTM in a Multi SSID Mult - Page 3

Network Setup Physical setup Layer 2/Layer 3 switch Port 0/1 connected to UTM10 Port 2 Wireless AP LAN port connected to UTM10 Port 1 UTM10 WAN port connected to the Internet Logical setup UTM 10 Configuration LAN IP 192.168.1.1 VLAN1 (default) IP 192.168.1.1 Membership: Port 1, 2, 3, 4 DHCP enabled 192.168.1.x/24 VLAN20 IP 192.168.20.1 Membership: Port 1 DHCP enabled 192.168.20.x/24 VLAN30 IP 192.168.30.1 Membership: Port 1 DHCP enabled 192.168.30.x/24 AP configuration LAN IP 192.168.1.235 Untagged VLAN: 1 - Management VLAN: 1 SSID Corporate - VLAN 1(ID 1) SSID Guest - VLAN 20 (ID 20) SSID Engineering - VLAN30 (ID 30) Layer 2/ Layer 3 switch configuration LAN IP 192.168.1.239 Management VLAN: 1 Membership: all ports Untagged in VLAN1 Version 2.0