Netgear WNDAP350 Layer 2/Layer and WNDAP330 to host a multi-SSID and multi-VL - Page 1

Layer 2 / Layer 3 switches and multi-SSID multi-VLAN network with traffic separation This document describes the steps to undertake in configuring a Layer 2/Layer 3 switch (in this document a FMS7382S with firmware 7.3.1.7) and a WNDAP330 to host a multi-SSID and multiVLAN network. The solution will allow separating the Wireless traffic and Wired traffic of each of the VLANs configured, from any other VLAN which will exist on the Wired or Wireless LAN. The diagram below shows a typical scenario. VLAN3 VLAN2 DGFV338 LAN to 1/0/2 WNDAP330 Management VLAN = 1 Management IP = 192.168.0.235 SSID "VLAN2" (VLAN ID = 2), Open system None SSID "VLAN3" (VLAN ID = 3), Open system None LAN to 1/0/6 LAYER2/LAYER3 SWITCH VLAN1: Management IP 192.168.0.254 Port: 1/0/1, 1/0/6, 1/0/7-1/0/28 (Untagged) VLAN 2: Ports: 1/0/2, 1/0/3 (PVID = 2, Untagged), 1/0/6 (Tagged) VLAN 3: Ports: 1/0/4, 1/0/5 (PVID = 3, Untagged) , 1/0/6 (Tagged) DGFV338 LAN IP: 10.0.0.1/24 DHCP 10.0.0.0/24 1/0/4 to LAN Internet Corporate LAN Version 1.0