Nikon 1713 Instruction Manual - Page 17

4 Release Shutter Confirm that / (in-focus indicator) appears in the viewfinder, then slowly, fully depress the shutter release button. With a moving subject, Continuous Servo AF (page 44) activates and camera continuously focuses on the subject. 1 Confirm indications in the viewfinder while lightly pressing the shutter release button. • When the subject is dark or backlit and shutter release button is lightly pressed, the built-in Speedlight automatically pops up and starts charging (pages 34, 76). 2 Confirm that focus indicator / appears and slowly depress the shutter release button. • After the shutter is released, the film automatically advances to the next frame and the next shot can be taken. 3 Film starts to rewind automatically when film reaches the end of the roll. • The frame counter counts down until rewind is complete. • Pictures taken on frames beyond the indicated number of the exposures for the film roll may be discarded in the process of developing. 4 Confirm that film is completely rewound, then remove film cartridge. • Film is completely rewound when the frame counter shows blinking E in the LCD panel. (E appears without blinking when the exposure meter is off.) Make sure the film is completely rewound (E is blinking in the LCD panel), open the camera back away from sunlight and remove the film cartridge by tilting it to one side. Check points • If any other warning indications appear, see page 99. • For mid-roll rewind, see page 66. BASIC OPERATION 32 33