Nikon 1718 Instruction Manual - Page 21
Gently close t, camera back, until, the camera back snaps, closed.
UPC - 018208017188
View all Nikon 1718 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3 Gently close the camera back until the camera back snaps closed . -~ :(,5 F5.6 @ BEu 3[m J 2) • The film automatically advances to final frame with blinking 0 , 0 _ , 0 __ , 0 ___ as indicated in LCD panel. • When the film has completed set up, a shutter sound is let out but no picture has been taken. • LCD Panel indicates number of exposures left on film. • Film rewinds one frame at a time as photos are taken . • When E appears in the LCD panel, film is not properly installed. Open the camera back again and reload film by aligning the film leader to the red index mark. • When Err and E in the LCD panel and Err in viewfinder blink, film is not correctly advanced. Open the camera back again and reload film . • Pictures taken on frames beyond the indicated number of the exposures for the film roll may be discarded in the process of developing . OX-coded film With OX-coded film , film speed will be set automatically between ISO 25 to ISO 5000. Film speed is set to ISO 100 with non-OXcoded film . OX-coded film ~ISO ~~ j6 (film speed) I); DX mark Check points • Avoid direct sunlight when changing film outdoors. • You can check the number of available exposures on the film roll and film speed through the film confirmation window. • Infrared films cannot be used with this camera since an infrared sensor is used for the detection of the film frame position. 21