Nikon 1718 Instruction Manual - Page 72

Film Rewind This section explains mid-roll rewind and what to do if the film does not .re.w.in.d Mid-roll rewind • To rewind film at mid-roll, press the two film rewind buttons El.!! simultaneously for approx. 1 sec. · 0 ___ ,0 __ , 0_ and then 0 appear in the LCD pane during film rewind and the frame counter counts backwards until rewind is complete. • Film is completely rewound when a blinking E ~ ~ 0 _ __1 [ -:S-J @ E"~ shows in the frame counter. (E appears without blinking when the exposure meter is off.) Make sun E is blinking, open the camera back and remove th film cartridge. 1--/ ----J S \ ~ "Q ~: ~ I @ II "\"' "Tc:-. :SJ E,,~ 1 ~ If film does not start to rewind or film rewind stops at mid-roll • When battery power is very low, or at low temperatures, film may not start rewinding or film rewind may stop at mid-roll , and 0 __ , frame V EJ number and insufficient battery power indication ~ will blink in the LCD panel. In this case, turn the power switch off, change batteries, then turn the power switch on and press the two fi lm rewind buttons El.!! simultaneously for approx. 1 sec. to rewind film again. 72