Nikon P5100 P5100 User's Manual - Page 67

Taking a Closer Look: Playback Zoom Rotating the zoom control to g (i) (playback zoom) X3.0 during full-frame playback mode (A 28) zooms the current picture in 3×, with the center of the picture displayed in the monitor (Quick Playback Zoom). The guide at lower right shows which portion of the picture is enlarged. Change the portion of the picture displayed by pressing the multi selector H, I, J or K. When using playback zoom with pictures shot using the X2.0 face-priority function, the picture will be enlarged, with the face recognized during shooting, at the center of the monitor. If more than one face was recognized, the picture would be enlarged with the face, on which focus was acquired, at the center of the monitor. Press the multi selector H, I, J, or K to display a different recognized face. The magnification ratio can be changed further by X4.0 operating the zoom control. The zoom ratio will be displayed in the monitor, and can be increased up to 10×. The following operations can be performed while pictures are zoomed in. More on Playback To Zoom in Zoom out Use Description A Zoom increases each time the zoom control is rotated g (i) to g (i), to a maximum of 10×. Zoom also increases by rotating the command - dial to right. Zoom decreases each time the zoom control is rotated to f (h). When the magnification ratio f (h) reaches 1×, the display returns to full-frame playback mode. - Zoom also decreases by rotating the command dial to left. View other areas of picture Press the multi selector H, I, J or K to move to areas of the picture not visible in the monitor. 10 Switch to fullframe playback Crop picture Switch to shooting mode k Press k. 28 d Press d to crop current picture to contain only the portion visible in the monitor. 56 c Press c or the shutter-release button to switch to the mode selected with the mode dial. 28 53