Nokia E60 User Guide - Page 9

Insert a memory card, Charge the battery, Switch on your device, See Memory - phone

Page 9 highlights

Get started Instead of a SIM card, you may also have a USIM card, which is an enhanced version of the SIM card and is supported by UMTS (network service) mobile phones. Contact your service provider for more information and settings. Insert a memory card If you have a memory card, follow the instructions to insert it. See "Memory," p. 14. 1. To open the memory card compartment, pull the door in the direction of the arrow (1). 2. Slide the memory card into the memory card slot (2). Ensure that the beveled corner of the memory card is pointing towards the device and the contact area is facing up. 3. Close the memory card compartment door. Important: Do not remove the MMC card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. Charge the battery 1. Connect the charger to a wall outlet. 2. Connect the power cord to the bottom of the device. The battery indicator bar starts scrolling on the display. If the battery is completely discharged, it may take a few minutes before the charging indicator is shown. The device can be used while charging. 3. When the battery is fully charged, the bar stops scrolling. Disconnect the charger from the device, then from the outlet. Switch on your device 1. To switch the device on, press the power key. 2. If the device asks for a PIN code (or UPIN code, if you have a USIM card), lock code or security code, enter the code, and select OK. 3. To switch the device off, press the power key. Tip: When you switch the device on, it may recognize the SIM card provider and configure the correct text message, multimedia message, and GPRS settings automatically. If not, contact your service provider for the correct settings, or use the Sett. wizard application. The device can be used without the network dependant phone functions when a SIM card is not inserted or when the Offline profile is selected. The picture shows the location of the power key. Copyright © 2006 Nokia. All Rights Reserved. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97

Instead of a SIM card, you may also have a USIM card, which is an enhanced version of the SIM card and is supported by UMTS
(network service) mobile phones. Contact your service provider for more information and settings.
Insert a memory card
If you have a memory card, follow the instructions to insert it.
See "Memory,"
p.
14
.
1.
To open the memory card compartment, pull the door in the direction of the arrow (1).
2.
Slide the memory card into the memory card slot (2). Ensure that the beveled corner of the memory card is pointing towards
the device and the contact area is facing up.
3.
Close the memory card compartment door.
Important:
Do not remove the MMC card in the middle of an operation when the card is being accessed. Removing
the card in the middle of an operation may damage the memory card as well as the device, and data stored on the
card may be corrupted.
Charge the battery
1.
Connect the charger to a wall outlet.
2.
Connect the power cord to the bottom of the device. The battery indicator bar starts scrolling on the display. If the battery
is completely discharged, it may take a few minutes before the charging indicator is shown. The device can be used while
charging.
3.
When the battery is fully charged, the bar stops scrolling. Disconnect the charger from the device, then from the outlet.
Switch on your device
1.
To switch the device on, press the power key.
2.
If the device asks for a PIN code (or UPIN code, if you have a USIM card), lock code or security code, enter the code, and select
OK
.
3.
To switch the device off, press the power key.
Tip:
When you switch the device on, it may recognize the SIM card provider and configure the correct text message,
multimedia message, and GPRS settings automatically. If not, contact your service provider for the correct settings, or
use the
Sett. wizard
application.
The device can be used without the network dependant phone functions when a SIM card is not inserted or when the
Offline
profile is selected.
The picture shows the location of the power key.
Get started
Copyright © 2006 Nokia. All Rights Reserved.
9