NordicTrack 2450 Treadmill English Manual - Page 14

Press the Left Base Cover 90 onto the Upright

Get NordicTrack 2450 Treadmill PDF manuals and user guides View all NordicTrack 2450 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

9. Attach the upper end of the Storage Latch (68) to the Frame (66) with a 3/8" x 1 3/4" Bolt (6) 9 and a 3/8" Nut (10). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the Frame. Attach the two Rear Foot Pads (71) to the bottom of the crossbar on the Frame (66) with four #8 x 3/4" Tek Screws (11). Be careful not to overtighten the Screws. Place the treadmill near the coaxial cable from your wall (or device). Lower the Frame (66) (see HOW TO LOWER THE TREADMILL FOR USE on page 36). 71 10 66 6 11 71 68 11 10. Connect the coaxial cable from your wall (or device) to the Upright Coaxial Cable (114). 10 Press the Left Base Cover (90) onto the Upright (93) until it snaps into place. 90 93 114 11. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see page 38). 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
14
9.
Attach the upper end of the Storage Latch (68)
to the Frame (66) with a 3/8" x 1 3/4" Bolt (6)
and a 3/8" Nut (10). Note: It may be necessary
to move the Frame back and forth to align the
Storage Latch with the Frame.
Attach the two Rear Foot Pads (71) to the bot-
tom of the crossbar on the Frame (66) with four
#8 x 3/4" Tek Screws (11).
Be careful not to
overtighten the Screws.
Place the treadmill near the coaxial cable from
your wall (or device).
Lower the Frame (66) (see HOW TO LOWER
THE TREADMILL FOR USE on page 36).
9
6
10
68
11.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see page 38).
66
10. Connect the coaxial cable from your wall (or
device) to the Upright Coaxial Cable (114).
Press the Left Base Cover (90) onto the Upright
(93) until it snaps into place.
114
90
93
10
11
71
71
11