NordicTrack 9600 Treadmill English Manual - Page 11

HOW TO CONNECT THE TREADMILL HOW TO CONNECT THE POWER CORD 2 This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. Note: These instructions describe how the power cord should be connected in the UK, Germany, Italy, Spain, or France. To connect the power cord in other countries, refer to the instruction sheet accompanying this manual. DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product-if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Germany UK France Spain Italy This product is for use on a dedicated circuit. In the UK, Germany, Italy, Spain, or France, use a dedi- cated 10-amp, 240-volt circuit. No other appliance should be on the same circuit. This product is 1 equipped with a cord having an equipment- grounding con- ductor and a grounding plug. Plug one end of Cord Bracket Bracket Screws the cord into the treadmill as shown in drawing 1. Attach the cord bracket over the cord with two bracket screws. Next, plug the grounding plug into a receptacle as shown in drawing 2 at the upper right. Do not modify the plug or the receptacle. Do not use an adapter or an extension cord. HOW TO CONNECT A CATV CABLE If your treadmill has the Workout TV console, a CATV cable must be connected to the treadmill for cable TV stations to be viewed. Locate the cable Cable Jack PAL Adapter jack on the front of the treadmill. Connect the CATV cable to the cable jack using the PAL adapter. A satellite receiver, VCR, or DVD player can also be connected to the treadmill. Connect a CATV cable from the coaxial output on your equipment (usually labeled TV OUT or RF OUT) to the cable jack on the front of the treadmill. Note: Audio/video equipment without coaxial outputs (some satellite receivers and DVD players) will require an RF modulator to work correctly with the treadmill. RF modulators are not available from FreeMotion Fitness, but are available at electronics stores. See the owner's manual for the equipment you wish to connect to determine if an RF modulator is needed, or contact your local audio/visual service provider. 10