NordicTrack 9800 Treadmill English Manual - Page 24
How To Reset The Lube Reminder
View all NordicTrack 9800 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
The console will begin scanning all TV channels. If no broadcast signal is detected on a channel, the channel will be skipped; if a signal is detected, a tone will sound and the channel will be stored in memory. This process will continue until the highest channel is reached. The lowest channel stored in memory will then appear in the main display. HOW TO RESET THE LUBE REMINDER If the words LUBRICATE DECK appear in the main display when the maintenance mode is selected (see step 9 on page 23), follow the steps below to reset the lube reminder. 15 Press the ENTER AGE button again and delete or add TV channels. After all valid TV channels have been stored in the console's memory, you can delete unwanted channels or add other channels. To delete or add a channel, first press the CHANNEL + and - buttons until the channel appears in the main display. 1 Insert the key into the console. See GETTING STARTED on page 14. 2 Hold down the STOP button and the RESET button simultaneously for three seconds. If the word DELETE appears beside the channel, press the + or - button beside the ENTER AGE button to delete the channel. If the word ADD appears beside the channel, press the + or - button beside the ENTER AGE button to add the channel. Then, select the next channel that you want to delete or add. Repeat this process until you have finished deleting or adding channels. 16 Hold down the ENTER AGE button and the RESET button simultaneously for two seconds to exit the maintenance mode. To exit the maintenance mode at any time, hold down the ENTER AGE button and the RESET button simultaneously for two seconds. 24