NordicTrack 9800 Treadmill English Manual - Page 8

4. Thread two Upright Bolts (106) into each Upright (96, 107) in the indicated locations. Do not tighten the 4 96 Upright Bolts yet. 107 106 106 5. Next it will be necessary to adjust the incline of the INCLINE TRAINER. First, plug in the power cord (see 5 page 10). Next, make sure that the on/off circuit breaker is in the on position (see step 2 on page 14). Place the Key (90) in the Console (89). Press the QUICK INCLINE button labeled "21" to adjust the incline to 21%. Then, remove the Key. Move the on/off circuit breaker to the off position and unplug the power cord. 6. Thread two additional Upright Bolts (106) into each 6 Upright (96, 107) in the indicated locations. Tighten all eight Upright Bolts in the Uprights. QUICK INCLINE buttons 89 96 90 107 106 7. See step 2 on page 7 and tighten the four Handrail Bolts (93). Place the Upright Caps (92) over the Handrail (94) and the upper ends of the Uprights (96, 107). Press the Handrail Caps against the hook-and-loop fastener strips on the Uprights. Attach each Handrail Cap with four Upright Cap Screws (91). Do not overtighten the Upright Cap Screws. 106 106 7 91 92 94 91 91 96 107 92 91 8