NordicTrack Audio Strider 600 Elliptical English Manual - Page 7

5. Orient the Left and Right Upright Covers (19, 20) 5 as shown. Then, attach the Upright Covers around the Upright (10) with five M4 x 16mm Round Head Screws (80). 80 80 80 19 20 10 6. Apply a generous amount of the included grease to the Upper Body Axle (71). Insert the Upper Body Axle into the Upright (10). Be careful not to damage the Upper Wire Harness (65). Apply a small amount of grease to a Wave Washer (101). Slide the Wave Washer onto the left end of the Upper Body Axle (71). Identify the Left Upper Body Leg (24), which is marked with a sticker, and orient it as shown. Slide the Left Upper Body Leg onto the left side of the Upper Body Axle (71). Attach the Left Upper Body Leg (24) to the Upper Body Axle (71) with an M8 x 19mm Button Screw (85) and an M8 x 23mm x 2mm Washer (96). Repeat this step for the Right Upper Body Leg (72). 6 65 Grease 10 Grease 71 101 96 85 101 24 96 85 72 7