NordicTrack Audio Strider 600 Elliptical English Manual - Page 8
Attach the Right Upper Body Arm 23 in - ac adapter
View all NordicTrack Audio Strider 600 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
7. Attach the Left Upper Body Arm (22) to the Left Upper Body Leg (24) with three M8 x 14mm Button Screws (84) and three M8 Split Washers (97). Attach the Right Upper Body Arm (23) in the same way. 8. Hold the Left Rear Upper Body Cover (26) and the Left Front Upper Body Cover (27) around the Left Upper Body Leg (24). Attach the Upper Body Covers with five M4 x 16mm Round Head Screws (80). Attach the Right Rear Upper Body Cover (28) and the Right Front Upper Body Cover (29) in the same way. 7 22 97 84 97 24 8 80 80 27 24 23 29 28 26 80 9. The Console (11) can use four D batteries (not included); alkaline batteries are recommended. 9 IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic compo- nents. Remove the battery cover, insert the bat- teries into the battery compartment, and reat- tach the battery cover. Make sure to orient the batteries as shown by the diagram inside the battery compartment. To purchase an optional AC adapter, contact the store where you purchased this product or call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied AC adapter. Plug one end of the AC adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. 11 Batteries Battery Cover 8