NordicTrack Audio Strider 600 Elliptical English Manual - Page 9
M8 x 45mm Button Screws 90, three M8 Split
View all NordicTrack Audio Strider 600 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
10. While another person holds the Console (11) near the Upright (10), connect the console wire harness to the Upper Wire Harness (65). Attach the Console (11) to the Upright (10) with four M4 x 16mm Screws (78). Avoid pinching the wire harnesses during this step. 10 11 Console Wire Harness 65 78 10 Avoid pinching the wire harnesses during this step 11. Orient a Link Arm (30) as shown. Attach the Left Pedal (34) to the Link Arm with three 11 M8 x 45mm Button Screws (90), three M8 Split Washers (97), and three M8 x 23mm x 2mm Washers (96). Attach a Pedal Arm Cover (39) to the Link Arm (30) with an M4 x 16mm Round Head Screw (80). Repeat this step for the Right Pedal (not shown) and the other Link Arm (not shown). 34 80 39 96 97 96 30 97 90 9