NordicTrack C 1500 Pro Treadmill English Manual - Page 13

13. Connect the ground wires (G), the 8-pin wires (F), the 10-pin wires (E), and the four speaker wires (H) from the Console (103). Note: The Upright Wire (81) has 8 pins, the pulse wire (E) has 10 pins, and the speaker wires (H) have 2 pins.  See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. After all of the wires are connected, pull the wires tight and tighten the Cable Ties (99) around the wires. Make sure that no wires are resting on any posts other than those with Cable Ties. Cut off the ends of the ties. 13 Console Wire 81 103 E G F 81 99 99 H 14. Insert the Console Base Back (93) into the hole in the console assembly and onto the top of the 14 indicated bracket. Be careful not to pinch any wires. Tighten two #8 x 1/2" Flat Head Screws (31) into the tray on the Console Base Back (93). 31 Bracket Console Assembly 93 13