NordicTrack C2500 Instruction Manual - Page 7
Identify the Right Upright 78 and the Right
View all NordicTrack C2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. With the help of a second person, carefully tip 2 the treadmill onto its left side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. 38 Cut the ties securing the Upright Wire (38) to the Base (83). Locate the tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. Attach a Base Pad (81) to the Base (83) in the location shown with a Base Pad Spacer (13) and a #8 x 1" Tek Screw (2). Then, attach another Base Pad (81) with only a #8 x 1" Tek Screw (2). 56 13 81 2 3. Attach a Wheel (84) with the 3/8" x 2" Bolt (4) 3 and the 3/8" Nut (8) that you removed in step 1. Do not overtighten the Nut; the Wheel must turn freely. 83 4 84 8 Hole 81 2 83 4. Identify the Right Upright (78) and the Right 4 Upright Spacer (79), which are marked with stickers. Insert the Upright Wire (38) through the 78 Right Upright Spacer as shown. See the inset drawing. Tie the long tie in the 38 Right Upright (78) securely around the end of 38 the Upright Wire (38). With the help of a second person, hold the Right Upright near the Base (83). Then, pull the other end of the long tie until 79 Long Tie the Upright Wire is routed completely through the Right Upright. 83 78 38 Long Tie 7