NordicTrack Cxt 990 Uk Manual - Page 10

HOW TO USE THE ELLIPTICAL CROSSTRAINER HOW TO PLUG IN THE POWER CORD This product must be earthed. If it should malfunction or break down, earthing provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-earthing conductor and an earthing plug. Two power cords are included. 1 Select the one that will fit your Socket on Elliptical Crosstrainer outlet. Refer to drawing 1, and plug the indicat- ed end of the power cord into the socket at the back of the ellip- 2 tical crosstrainer. Outlet Refer to drawing 2. Plug the power cord into an appropriate outlet that is properly installed and earthed in accor- dance with all local codes and ordinances. Note: In Italy, an adapter (not includ- ed) must be used between the power cord and the outlet. Important: The elliptical crosstrainer is not compatible with GFCI-equipped outlets. If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord. DANGER: Improper connection of the equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product-if it will not fit the outlet, have a proper outlet installed by a qualified electrician. THE ON/OFF SWITCH Locate the on/off switch at the back of the elliptical crosstrainer. The switch must be in the on position when the elliptical crosstrainer is used. If necessary, move the switch to the on position. On Position HOW TO ADJUST THE PEDALS The motion of the pedals is determined by their positions on the spring arms. There are five different pedal positions. To adjust the pedals, first loosen the knob beneath each pedal. Slide the pedals forward or backward to the desired position, and then retighten the knobs. Make sure that both pedals are in the same position. Pedal Knob 10