NordicTrack Elite 1500 Uk Manual - Page 10
If You Do Not Connect The, May Become Damaged When You Turn
View all NordicTrack Elite 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
6. IMPORTANT: To avoid damaging the Pulse Crossbar (80), do not use power tools, and 6 2 do not overtighten the #10 x 3/4" Screws (6) or the 5/16" x 2" Screws (2). 8 Orient the Pulse Crossbar (80) as shown. Attach the Pulse Crossbar with two of the 5/16" x 2" Screws (2) that you removed in step 3, two 5/16" Star Washers (8), and two #10 x 3/4" Screws (6). Start all four Screws, and then tighten them. Then, tighten the other two 5/16" x 2" Screws (2). 6 2 80 2 6 8 2 7. With the help of a second person, hold the console assembly (B) near the Handrails (74). 7 See the inset drawing. Connect the Upright Wire (83) to the console wire (D). The connec- tors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove any wire ties B from the Upright Wire. 74 D 83 D 83 10