NordicTrack Elite 1500 Uk Manual - Page 22
How To Use A Pulse Workout, See How To Turn On The Power
View all NordicTrack Elite 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
5. Measure your heart rate if desired. 5. Enter your maximum heart rate. See step 6 on page 19. 6. Turn on the fan if desired. See step 7 on page 20. Use the increase and decrease buttons next to the Enter button to enter your maximum heart rate. Note: To determine your maximum heart rate, consult your physician or a physician-recommended source. 7. When you are finished exercising, remove the key from the console. See step 8 on page 20. HOW TO USE A PULSE WORKOUT Pulse workouts automatically control the speed and incline of the treadmill to keep your heart rate near a target level while you exercise. Note: You must wear a chest heart rate monitor to use a pulse workout. 1. Put on the included chest heart rate monitor. For more information about the chest heart rate monitor, see page 15. 2. Insert the key into the console. See HOW TO TURN ON THE POWER on page 18. 3. Select a pulse workout. To select a pulse workout, press the Set A Goal button on the console. To select a pulse weight loss or pulse performance workout, press the increase and decrease buttons next to the Enter button and then press the Enter button. 4. Enter a workout time. Use the increase and decrease buttons next to the Enter button to choose the duration of the workout, and then press the Enter button. 6. Start the workout. Press the Start button to start the workout. A moment after you press the button, the walking belt will begin to move. Hold the handrails and begin walking. 7. Enter a warm-up speed. T he workout will begin with a two-minute warm-up period. The default warm-up speed is 3 Km/H. To select a different speed for the warm-up period, press the speed increase and decrease buttons or the numbered Speed buttons. Note: The speed of the workout will increase relative to the warm-up speed you have selected. 8. Follow your progress with the displays. See step 5 on page 19. 9. Turn on the fan if desired. See step 7 on page 20. 10. Set a cool-down speed. The workout will end with a two-minute cool-down period. The default cool-down speed is 3 Km/H. To select a different speed for the cool-down period, press the increase and decrease buttons or the numbered Speed buttons. 11. When you are finished exercising, remove the key from the console. See step 8 on page 20. 22