NordicTrack Elite 1500 Uk Manual - Page 14
Make sure that all parts are properly tightened before you use the treadmill.
View all NordicTrack Elite 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14. Raise the Frame (52) to the position shown. Have a second person hold the Frame until 14 step 15 is completed. Orient the Storage Latch (56) so that the decal is facing away from the treadmill as shown. Attach the lower end of the Storage Latch (56) to the bracket on the Upright (84) with a 5/16" x 1 3/4" Bolt (3) and a 5/16" Nut (9). Raise the Storage Latch (56) to a vertical position. Then, remove and discard the tie (F). 52 F 56 Decal 15. Align the upper end of the Storage Latch (56) with the bracket on the Frame (52). Insert a 15 5/16" x 2 1/4" Bolt (4) through the bracket. This should push a spacer (G) out of the other end. Discard the spacer. Attach the Storage Latch (56) with a 5/16" x 2 1/4" Bolt (4) and a 5/16" Nut (9). Lower the Frame (52) (see HOW TO LOWER THE TREADMILL FOR USE on page 26). 9 84 3 9 G 52 4 56 16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 28 and 29). Note: Extra parts may be included. 14