NordicTrack Gx 4.1 Uk Manual - Page 6
Assembly
View all NordicTrack Gx 4.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps. • To identify small parts, see page 5. • In addition to the included tool(s), assembly requires the following tools: one adjustable wrench one Phillips screwdriver Assembly may be easier if you have a socket set or a set of ratchet wrenches. To avoid damaging parts, do not use power tools. 1. Attach the Rear Stabilizer (3) to the Frame (1) with two M10 x 95mm Patch Screws (76). 1 3 76 2. Attach the Front Stabilizer (2) to the Frame (1) with two M10 x 95mm Patch Screws (76). 2 1 2 76 1 6
6
ASSEMBLY
• Assembly requires two persons.
• Place all parts in a cleared area and remove
the packing materials. Do not dispose of the
packing materials until you complete all
assembly steps.
• To identify small parts, see page 5.
• In addition to the included tool(s), assembly
requires the following tools:
one adjustable wrench
one Phillips screwdriver
Assembly may be easier if you have a socket set
or a set of ratchet wrenches. To avoid damaging
parts, do not use power tools.
1.
Attach the Rear Stabilizer (3) to the Frame (1)
with two M10 x 95mm Patch Screws (76).
2.
Attach the Front Stabilizer (2) to the Frame (1)
with two M10 x 95mm Patch Screws (76).
1
2
3
2
76
76
1
1