NordicTrack Gx 4.1 Uk Manual - Page 8
Tip: Avoid pinching the Extension Wire 59., Avoid pinching the, Extension Wire 59, Tip: Avoid
View all NordicTrack Gx 4.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Apply some of the included grease to an M6 x 70mm Bolt Set (50). Orient the Handlebar (5) and the Upright (4) as shown. While a second person holds the Handlebar (5) near the Upright (4), insert the Extension Wire (59) upward through the Handlebar. Tip: Avoid pinching the Extension Wire (59). Attach the Handlebar (5) to the Upright (4) with the M6 x 70mm Bolt Set (50) and two M8 Washers (43). Then, attach an M6 x 60mm Bolt Set (51) through the lower bracket on the Handlebar (5). 5 50 43 Grease 51 59 5 43 50 51 4 Avoid pinching the Extension Wire (59) 6. While another person holds the Console (13) near the Handlebar (5), insert the long receiver 6 wire (A) on the Console through the Handlebar as shown. Then, connect the other wires on the Console (13) to the Extension Wire (59) and to the Pulse Wire (61). Tip: Avoid pinching the wires. Attach the Console (13) to the Handlebar (5) with four M4 x 16mm Screws (90). Avoid pinching the wires 13 61 5 59 A 90 8